|
|
|
|
 JL-100II Automatic Hambuger Patty Forming Machine
This machine can automaticaly complete the working procedures of filling,stuffing,molding, pasting patty paper,output,etc,and can be used to
produce hamburger patty and chicken nuggets,etc.
Stainless steel and other materials special for food are adoped for the whole machine .
Size of mould: 35-100mm
Thickness of patty: 8-20 (adjustable)
Output: 2100pcs/h(dia.100mm)
Power: 0.55kw
Voltage: 380V 3P
Dimension: 715*600*1400mm
|
|
|
 HX-200 Pneumatic Hambuger Patty Forming Machine
This machine can automaticaly complete the working procedures of filling,stuffing,molding, pasting patty paper,output,etc,and can be used to
produce hamburger patty and chicken nuggets,etc.
Stainless steel and other materials special for food are adoped for the whole machine .
Technical Data;
Power: 0.75Kw
Voltage: 380V/50Hz
Largest productivity: 250kg/h
Output: 25-35pcs/min
Diameter of patty mould: 30-130mm
Width of conveyor: 200mm
Size: 1215*1030*1800mm
|
|
|
 Meat Cubing Machine(Model JL-350)
Main characteristics include:
1)Adjusting thickness-cutting knob may carry out stepless speed regulation of push rod so as to meet the requirement of different cutting thickness.
2)Having adopted the use of pre-pressure design so as to ensure making diced meat in even cubes.
3)When single-edge cutting, meat push rod makes step- by-step motion to ensure correct cutting dimension.
Technical Data: Model: 350
Output: 350-500kg/h
Cutting Tank Size: 84x84X350mm
Cutting Barrier Size: 5,6,7,8,9,11,13,16,20,27
Power: 1.5kw Voltage:380V
Dimension:1480x800x980mm
|
|
|
 S-260 Rapid Sausage Filler
Features:
1.Stainless steel body looks luxury and elegant, ad also ensure that the food processed is clean.
2.Bowl with big capacity. Hydraulic system lifting sausage up and down, Low noise and high efficiency;
3.Imported and domestic branded electric appliances and hydraulic components ensure good quality and long service life.
Conversion swtich and food-switch offer safer operation.
Model: S-260
Output: 400kg/h
Power: 450W
Voltage:120V/ 220V/240V 1P
Dia. of feed bin: 260mm
Dimension: 400*500*1220mm |
|
|
 TC Series Meat Mincer
Model: TC-42A
Output: 650kg/h
Power: 4Kw
Voltage: 380V 3P
N.Weight: 107Kg
|
|
|
 Bone Saw
Model: J-400A
Voltage: 380V /415V 3P
Power: 1.5kw
Belt Wheel Dia.:400mm
Blade Speed:15m/s
Table size: 890*900mm
Cutting Thickness: 30-350mm
Dimensions: 980*1160*1800mm
N.Weight: 175kg
IPNO: IPX1 |
|
|
 Meat Mixer
Model: JB-300
Volume: 300L
Power: 2.2kw*2
Speed of mixing: 42r/min
Voltage: 380V 3P
Features:
The machine is made of stainless steel. The material can be mixed evenly inflated sufficiently, and with the characteristics with of no air bubble, good flexibility, bright color and the ability of extracting protein to the maximum limit. |
|
|
 Automatic Sausage Tying Machine
Features:
** Without power, the full automatic can be realized by an air pipe.
** High performance, low maintaining cost and easy to operate
** Stepless adjustable length for filling. Accuracy and Even.
** The Sausages re ned not to be cut when packing, they can be separated just by drawing the thread. It is manpower-saving and have no contamination.
** The sausage processed with consistent length and curacy and even
** Suitable for any kind of casing. have broad selectivity
** Made of stainless steel
Technical Datas:
Diameter of sausage: below 30mm
Length of tying; 40-150mm
Air compressor: 0.6Mpa
Size: 1850*1500*900mm
N.weight: 400kg
|
|
|
 Grinder RJ Series can grind flesh lump and foods into grains of 3-25mm. there have single grinding shaft or twin grinding shaft, with tendon removing device. For the grinder with tendon removing device, whole tendon removing device, knives and hole-plates are imported from Germany. It can remove tendons and bone scraps from meat. This machine adopt stainless steel , and with safety guards. for properly designed structure. Ensure discharges at high speed and low temperature increase. It is necessary equipment for meat processing enterprise.
Technical datas:
Model: BJ-160B
Capacity: 1200kg/h
Power; 6.8/8.0KW
Discharge Height: 850mm
Discharge Caliber: 160mm
Weight; 650kg
Dimension: 1580*1000*1350mm
Germany knife and tendon separator |
|
|
 Automatic Sausage Filling & Tying Machine
This machine can fulfill sausage filling and tying machine at a time. The tying lenght is adjustable according to your need.
Technical Data:
Model: JL-310
Volume of hopper: 150L
Power: 2.1kw
Voltage: 380V,3P
Filling Pressure: 2.5MPa
Tying Mold: 8 sets (according to customer's need)
Tying Speed: 200-400pcs/min |
|
|
 PJ-380 Bone Breaking Machine
Features:
This is a high-fficient claw-shape mightiness break-bone machine. This equipmentis especially suit for breaking dry or fresh bones in small pieces, such as:beef large bnes, pork large bne, sheep large bones and ther animal large bones, etc. The body of machine is made of stainless steel, the knife and net is made of carbon steel.
Technica Data:
Power: 7.5kw
Voltage: 380V/3P
Feeding gate sizeļ¼480*290mm
Cutting size: 10-60mm
Stationary cutter: 2 pcs
Rotary cutter: 18pcs
N.weight: 500kg
Dimension:1070*840*1390mm
Productivity:100-400kg/h |
|
|
|
|
|
|
|
|
|
